So you’ve decided that you want to change the reach on your dirt bike? You’re in luck because it’s a pretty easy process with the correct tools. In this tutorial, we’ll show you how to bend dirt bike handlebars without ruining them. You only need a heat gun, some vice grips, and a Flathead screwdriver. Let’s get started!
What Is a Dirt Bike Handlebars?
A dirt bike handlebars are specially designed for motocross racing. They are made of lightweight aluminum or steel tubing and have a crossbar for added strength. The bars are usually about 28 inches wide, which gives the rider more leverage when making turns. In addition, the crossbar helps to protect the rider’s chest in case of a fall.
Dirt bike handlebars also have special grips that are designed to withstand the rigors of off-road riding. These grips are usually made of hard rubber or plastic and have a knurled surface to prevent the rider’s hands from slipping.
Why Should You Bend Dirt Bike Handlebars?
You might want to bend the handlebars on your dirt bike for several reasons. For one thing, it can help to improve your riding position, making it easier to control the bike and helping you to avoid fatigue. Additionally, bent handlebars can also provide greater leverage when cornering, making it easier to take tight turns.
Finally, many riders simply prefer how bent handlebars look, and they can give your bike a more aggressive appearance. Ultimately, whether or not you choose to bend your dirt bike’s handlebars is up to personal preference. However, there are several potential benefits that you may want to keep in mind.
7 Steps to Follow on How to Bend Dirt Bike Handlebars
Step 1: Select the Right Bar
There are many different types of dirt bike handlebars available on the market, so it is important to select the right one for your needs. Most handlebars are made from either steel or aluminum, so keep this in mind when making your selection.
Step 2: Measure the Width of the Handlebar
Once you have selected the right handlebar, you will need to measure its width. This is important because you will need to know how much material you will need to remove to make the bend.
Step 3: Make a Mark on the Handlebar at the Desired Bend Point
After you have measured the width of the handlebar, you will need to make a mark at the desired bend point. This will give you a reference point to work from when bending the handlebar.
Step 4: Place the Handlebar in a Vise
Once you have made your mark, you must place the handlebar in a vise. Make sure that the vise jaws are lined up with the marks you made earlier. This will ensure that the handlebar is bent in the correct spot.
Step 5: Begin Bending the Handlebar
Once the handlebar is secured in the vise, you can begin bending it. You will need to apply even pressure to avoid creating any kinks or bends in the wrong spot.
Step 6: Check the Handlebar for Symmetry
After you have finished bending the handlebar, you will need to check it for symmetry. Make sure that both sides of the handlebar are evenly bent before proceeding to the next step.
Step 7: Repeat Steps 4-6 on the Other Side of the Handlebar
Once you have checked the handlebar for symmetry, you will need to repeat steps 4-6 on the other side of the handlebar. This will ensure that both sides of the handlebar are evenly bent.
That’s it! You’ve now learned how to bend dirt bike handlebars. Just follow these simple steps, and you’ll be able to customize your bike to suit your riding style better.
About Dirt Bike Handlebars
“dirt bike handlebars”
“dirt bike handlebars 7/8”
“dirt bike handlebars not straight”
